Wireless internet connection problems are quite common when you are using a windows system. This issue can appear anytime, so you must be prepared for how to tackle any type of Wi-Fi connectivity issue on your laptop. Stable internet connectivity is very important to ensure the quality of any work these days.
As most of the world has now gone online, for almost every task, you will need a valid and speedy internet connection. You can easily diagnose the exact issue from your system without needing to call any fibre internet checker.
We have listed the ways you can tackle any internet issue without having to waste any of your precious time.
Copyright: Pixabay on Pexels I License: CC0 Public Domain
If you are a Windows 10 user, then follow the tips below to diagnose and resolve any wireless internet connectivity problems.
Table of Contents
Wi-Fi Connected With No Internet Connection
You might sometimes notice that when you connect to a certain network, a prompt appears on the screen mentioning that you are connected to the Wi-Fi, but there is no internet connection. This issue can be easily resolved with a few steps. The first one is to try the built-in troubleshooting tool.
- Click on the Windows button on the bottom left corner of the screen and go the Settings.
- Open the “Update and Security” section and then go to “Troubleshoot.”
- Click on the “Internet Connections” option and then click on “Run the troubleshooter.”
If the above steps don’t work, then you can solve this issue with the command prompt as well. Open the command prompt on your system and type in the following commands:
- netsh int ip reset
- ipconfig /renew
- ipconfig /flushdns
- netsh winsock reset
This issue might also appear due to any kind of network outages in your area. For this, you can easily take help from Belong to check any internet outage.
Cannot Find A Wi-Fi
You might not be able to find the desired Wi-Fi connection on your Windows system. If this is the case, then the first and foremost thing to check is whether you are within the range of the router! The next thing to check is whether the route is turned on! If the router is on and your system is in the range of the router, then you might be able to resolve this issue with the following solutions.
Restart The Router
Follow the steps below to restart the router:
- Unplug your router from the power source.
- Wait for 30 seconds to a minute, and then reconnect your router.
- Turn on the router and wait for all the LED lights to blink.
Once the router is rebooted, try searching the Wi-Fi network from your device again.
Copyright: Pixabay on Pexels I License: CC0 Public Domain
Disable And Enable NIC
To disable or enable your NIC, please follow the steps below:
- Press the windows and R keys from your keypad.
- Type ‘ncpa.cpl’ and click on the enter key.
- Right-click on the wireless adapter and hit the ‘Disable’ option.
- Again, right-click on the wireless adapter and hit the ‘Enable’ option.
Once done, restart your system and try searching for the Wi-Fi again.
Network Adapter Drivers Update
To update the drivers of the network adapter, follow the steps below:
- Press Windows and R keys from your keypad.
- Type ‘devmgmt.msc’ and click on the enter key.
- Click on the Network Adapters option.
- Right-click on the Wi-Fi Controller option.
- Select the Update Drivers option.
- Once done, click on the ‘Search automatically for updated driver software option.
Once the drivers are successfully updated, reboot your system and search for Wi-Fi again.
Cannot Connect To Wi-Fi
You might be able to search for the Wi-Fi network on your system but not be able to connect to the searched network. Any error could appear in this scenario, but the bottom line is that you are not able to connect to the desired Wi-Fi. To resolve this issue, follow the steps below:
- Press the Windows and X keys from your keypad.
- Click on the ‘Device Manager option.
- Right-click on the network adapter and choose the Uninstall option.
- Click on the ‘Delete the driver software for this device option.
Once done, restart your system, and Windows will automatically reinstall all the necessary drivers.
No Valid IP Configuration
The problem might be with the IP configuration set up for your system. To check and resolve this issue, you can follow the steps below:
- Use an ethernet cable to connect the router to your system.
- Enter the router’s IP address in the browser.
- After logging into the device’s portal, change the network’s name and password.
Try to reconnect using the new password for the Wi-Fi network.
Enjoy Seamless Internet Connectivity
By following the procedures mentioned and explained above, you will be able to enjoy seamless internet connectivity without any issues. Most internet connectivity issues can be easily tackled with the steps explained above. However, if it is still not resolved, then it might be time to seek help from your internet provider.
